The variety and color pattern of the desk calendar are also very rich, which makes people have a bright feeling. How are these exquisite desk calendars printed? The display desk calendar introduced by Jinan desk calendar printing factory today is a very personalized stamping process:

　　烫金技术已广泛应用于画册印刷,因其的生产和市场广泛赞誉,为了不断提高印刷品的细腻程度和价值,从这个特殊的烫金技术,烫金技术分为传统烫金技术和特殊的烫金技术两大阵营。

　　Bronzing technology has been widely used in album printing. Due to its exquisite production and widely praised by the market, in order to continuously improve the fineness and value of printing products, from this special bronzing technology, bronzing technology is divided into two camps: traditional bronzing technology and special bronzing technology.

　　特种烫印与传统烫印的区别

　　Difference between special hot stamping and traditional hot stamping

　　1.在烫印过程中不需要制作金属浮雕板，成本低，速度快，只要有正负极就可以烫印。

　　1. In the process of hot stamping, there is no need to make metal relief plate, which has low cost and fast speed. As long as there are positive and negative poles, it can be hot stamping.

　　2.适合生产小批量、多品种个性化烫金产品。

　　2. Suitable for the production of small batch, multi variety personalized bronzing products.

　　3.烫印温度低，100 - 130度。

　　3. Stamping temperature is low, 100-130 ℃.

　　4.适用于大面积、细线、图片的烫印。

　　4. Suitable for large area, thin line and picture hot stamping.

　　烫印基板不取，如:各种塑料薄膜、纸张、皮革、金属、玻璃等。

　　Hot stamping substrate is not used, such as: all kinds of plastic film, paper, leather, metal, glass, etc.

　　在定制台历的过程中，还要控制烘烤时间和温度，达到协调的效果。烘烤时间不宜太长,更好控制在5到10分钟,然后热冲压工艺,在烫印,也要把握好时机,大概15秒25秒之间,另一方面,也应注意,采用热冲压工艺的不同方式,注意事项是不同的,不适应上述各种考虑。

　　In the process of customizing the desk calendar, the baking time and temperature should be controlled to achieve a coordinated effect. Baking time should not be too long. It is better to control it within 5 to 10 minutes, and then hot stamping process. In hot stamping, we should also grasp the opportunity, about 15 to 25 seconds. On the other hand, we should also pay attention to the different ways of hot stamping process, the precautions are different, which are not suitable for the above considerations.

　　烫印:在烫印过程中，金、银烫印箔的粘接层与感光膜的热塑性部分由于热熔粘接而成，而热固性部分不粘接，从而实现烫印膜的转移。烫印设备有塑料封口机、熨斗、烫印机等用于烫印。保持温度在100到130度之间。

　　Hot stamping: in the process of hot stamping, the bonding layer of gold and silver hot stamping foil and the thermoplastic part of the photosensitive film are formed by hot-melt bonding, while the thermosetting part is not bonded, so as to realize the transfer of the hot stamping film. Hot stamping equipment has plastic sealing machine, iron, hot stamping machine for hot stamping. Keep the temperature between 100 and 130 degrees.

　　烫印产品:烫印后轻轻除去烫印膜上多余的部分，成为令人眼花缭乱的成品。

　　Hot stamping products: after hot stamping, gently remove the excess part of the hot stamping film to become a dazzling finished product.

　　以上是济南台历挂历印刷厂家小编为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：http://www.jindingyinshua.com

　　The above is the relevant content introduced by Jinan calendar printing factory. If you want to know more, please visit the website: http://www.jindingyinshua.com