1.手提袋印刷由于水墨为纯水性体系，不要将水墨与醇性墨和溶剂型油墨混合运用或在墨中参加有机溶剂，以免招致呈现印刷产品的质量问题。
1. Handbag printing because ink is pure water-based system, do not mix ink with alcohol ink and solvent-based ink or participate in organic solvents in ink, in order to avoid the quality problems of printing products.
2.水墨宜寄存在室内，室温需求控制在在5℃—50℃摄氏度之间。
2. Ink and wash should be stored indoors. The room temperature requirement should be controlled between 5 and 50 degrees Celsius.
3.运用时，应用搅拌棒将水墨在桶中搅匀，丈量其粘度后倒人墨槽。粘度若过高或过低，能够加稀释剂或增稠剂停止调理。
3. When using, mix the ink in the barrel with a stirring rod, measure its viscosity and pour it into the ink tank. If the viscosity is too high or too low, diluent or thickener can be added to stop conditioning.
2
Two
4.印刷过程中由于水存在挥发作用，可能会招致水墨粘度升高和PH值降落，PH值应控制在8．5—9．5之间好，若超出了这个范围，可用PH稳定剂停止调理，坚持粘度和PH值的稳定。
4. Because of the volatilization of water in printing process, it may lead to the increase of ink viscosity and the decrease of PH value. PH value should be controlled between 8.5 and 9.5. If it exceeds this range, PH stabilizer can be used to stop conditioning, and stick to the stability of viscosity and PH value.
5.普通状况下，水墨极适于手提袋印刷高速印刷，低速印刷时若遇到枯燥速度太快或印刷效果不佳的状况，可添加一定比例的慢干剂处理。
5. Under normal conditions, ink is very suitable for high-speed printing of handbag printing. When low-speed printing encounters too fast drying speed or poor printing effect, a certain proportion of slow drying agent can be added.
6.手提袋印刷终了后应将剩余水墨搜集回相应的原装桶中或将墨槽的盖子盖严，谨防由于水的挥发招致水墨外表结膜、变稠以变干状况的呈现。
6. After the printing of the handbag, the remaining ink should be collected back into the corresponding original barrel or the cover of the ink tank should be tightly covered, so as to prevent the appearance of conjunctiva, thickening and even drying due to the volatilization of water.
This article is from: Jinan packaging printing more content please click: http://www.jindingyinshua.com, we will provide you with a satisfactory service to ask questions, welcome your call!
