折页的品种比拟多，常见的有对折页、三折页，折叠办法有包心折、凤琴折、十字折等，而今天我们引见的关门折页望文生义是一品种似两扇大门关门的折法，多折页则是指四折以上的折页，这两种折页合适在宣传展现的内容较多的状况下运用，也是很有效的宣传方式。相关于其它折页，关门折页和多折页样式更新颖，折页内容分类更明白，当然在内容设计编排和印刷前后期与常见的对折页、三折页都会有些不同。
There are many kinds of folding pages, such as double folding and three folding pages. The folding methods include wrap-up folding, phoenix-piano folding and cross folding. The folding method we introduced today is a kind of folding method similar to two doors'closing. The folding method of multiple folding pages refers to folding over four folding pages. These two folding pages are suitable to be used in the situation of more publicity and exhibition, and are also very effective propaganda. Way. Relevant to other folding, closed folding and multi-folding style is more innovative, folding content classification is more clear, of course, in the content design layout and printing before and after the common folding, three folding will be somewhat different.
关门折页和多折页在印刷方面有很多共同点，两者要留意的如下：
Closed folders and folders have a lot in common in printing. The main points to be noticed are as follows:
一、做好印刷前期的设计工作
First, do a good job in the pre-printing design work
关门折页和多折页在印刷前期的设计时就必需肯定折页的版式，分配好每一个版面的内容，防止折时遮住文字和图案信息，有色块的内容尽量防止横跨折叠的位置，否则折叠时可能会呈现爆边的状况，要分分明折叠时哪一个版面是正面，哪一个版面反面，方向要规划好，防止客户翻开折页时而正向看，时而翻转180度看，影响客户体验度，进而削弱了宣传效果。
Closed folding and multi-folding in the pre-printing design must affirm the folding layout, allocate the content of each page, prevent folding from covering text and pattern information, and prevent the content of colored blocks from crossing the folding position as far as possible. Otherwise, folding may present a situation of explosive edges. It is necessary to clarify which page is frontal, which page is opposite and which direction should be regulated. Layout well, to prevent customers from turning the folding page forward sometimes, and sometimes turning 180 degrees to see, affecting customer experience, thereby weakening the publicity effect.
二、选择折页印刷的折叠方式
2. Choosing folding method for folding printing
关门折页和多折页能够选择机器折叠和人工折叠两种不同的折叠方式。区别在于人工折叠效率低，本钱高，故常常并不是佳的选择，普通适用于纸张资料较厚的情形下。而机器折叠效率十分高，折叠的效果也比拟好。因而，停止关门折页印刷和多折页印刷时，倡议省时又省力的机器折叠方式。但有一点需求留意的是一定要选择质量较好的纸张，由于质量好的纸张不容易发作爆边问题，当然在本钱允许的状况下单面或双面都覆膜也是一种有效避免爆边发作的工艺选择
Closed folding and folding can choose two different folding methods: machine folding and manual folding. The difference lies in the low efficiency and high cost of manual folding, so it is often not the best choice. It is generally applicable to the case of thicker paper materials. And the machine folding efficiency is very high, folding effect is also comparable. Therefore, when shutting down folding and multi-folding printing, the preferred time-saving and labor-saving machine folding method is proposed. But there is a need to pay attention to the selection of better quality paper, because good quality paper is not easy to burst edge problem, of course, under the condition of allowable cost, one-sided or double-sided film is also an effective process choice to avoid burst edge.
三、注重印刷后期的折叠细节
3. Focus on Folding Details in Late Printing Period
关门折页和多折页折叠时要保证封面和封底的尺寸比内折版面的尺寸宽约0.51毫米，整体的效果会更美观谐和。这是一项需求思索很多要素的环节，从前期设计的分配版面尺寸、印刷正背面的精确套位，到后期折页机调机都需求丰厚的经历，所以高质量的关门折页印刷和多折页印刷需求努力做好每一道细节。
When folding doors and folders, make sure that the size of the cover and the bottom is about 0.5 to 1 mm wider than that of the inner fold, and the overall effect will be more beautiful and harmonious. This is a link that needs to think about many factors, from the distribution of layout size designed in the early stage, the precise set on the front and back of printing, to the later stage of folding machine adjustment, all require rich professional experience, so high-quality closed folding printing and multi-folding printing need to make every effort to do a good job in detail.
Thank you for reading, this article source: Jinan album printing more content and questions, please click: http://www.jindingyinshua.com, we will continue to work hard to provide you with services, thank you for your support!
