There are five main steps in the process of picture album printing: first, the planning of printing, printing things to fit the theme, the way of printing, the size of the layout, the subject matter of the printed matter, the number of colors used in paper or printing, and also the selection of merchants, all of them should be serious, as long as the consultation is good, they can make satisfactory products.

第二点便是要根据印刷规划来停止文案的撰稿、设计和版面规划等，是制造完成的前置作业的程序，同时也需求布置摄影及插图的绘制，与对应的商家停止圆满的配合。

The second point is to stop copywriting, design and layout planning according to the printing plan, which is the process of pre-production. At the same time, it also needs to arrange photography and illustration drawing, and stop cooperating with the corresponding businessmen satisfactorily.

第三点是根据版面规划的初稿，将其文案、照片和插图、正确位置与正确的颜色标示等，循序的布置在完稿纸上或以电子稿方式处置完好个稿件，并且明白指示制版之各项特殊请求的各项特殊请求指示，这就是制版的前置作业。

The third point is that according to the preliminary draft of layout planning, its copy, photos and illustrations, correct location and correct color labeling, etc., are arranged on the finished paper in sequence or disposed of in good condition by electronic manuscript, and the specific request instructions indicating the special requests for plate-making are clear. This is the pre-operation of plate-making.

第四点就是完稿完成进入制版一步，图片都是以电子分色机扫描分色，文字、线条以黑白相机拍照，冲出正确的过网数，并将文字、插图等依照完稿上之指示拼板，然后停止晒板作业，然后印出彩色打样送回设计者的手中停止校正。像是用电子完稿处置便需交输出中心的输出底片，也需求细致的填写输山工作单或着是指示单、明白的指示输出的线数及彩色、页数，有无造字及规格数量等项目，防止沟通上之错误，形成不用要的损失。

The fourth point is to finish the manuscript and enter the plate-making step. The pictures are scanned by an electronic color separator. The text and lines are photographed by a black-and-white camera, and the correct number of crossings is dashed out. The text and illustrations are put together according to the instructions on the finished manuscript. Then the sun-drying plate is stopped, and the color proofing is printed and sent back to the designer to stop. Correcting. For example, it is necessary to submit the output negatives of the output center for electronic manuscript completion. It is also necessary to fill in the mountain work sheet meticulously or refer to the number of lines and colors and pages of the output of the instruction sheet, the number of lines and pages with clear instructions, and the number of characters and specifications, so as to prevent communication errors and unnecessary losses.

第四点也是印刷前的后一个步骤，就是要检查彩色打样能否契合完稿上一切指示的停止程序，有颜色的校正与它修正时一定要特别认真用红笔写出详细易懂的文字阐明或位置轮廓，正确的传达给制版的人员，避免有不用要的损失。

The fourth and final step before printing is to check whether the color proofing meets the stop procedure of all instructions on the manuscript. When correcting the color proofing and correcting it, we must carefully write out the detailed and understandable text or position outline in red pen, and correctly convey it to the plate-making personnel so as to avoid unnecessary. Loss.

第六点是印刷时，要将修正好的四色网片转晒成印刷用版，送上印刷机器，就开端了后的印刷。假如要想在印刷机上得到理想的印刷废品，就要理解印刷要素，由于其中有许多的可变要素，对印刷的质量影响很大，所以，要认清这些要素。

The sixth point is that when printing, the corrected four-color screen should be converted into a printing plate and sent to the printing machine, so that the final printing can be started. If you want to get ideal printing waste on the printing press, you need to understand the printing elements, because there are many variable elements, which have a great impact on the quality of printing, so we need to recognize these elements.

第五点则是印刷后了，印刷品的后一道手续，就是装订加工，普通单张平面式用到多的就是裁切、压线、折叠等，要依据画册的页数、纸张的类型，精巧度与运用方式和目的来停止决议了。

The fifth point is that after printing, the final procedure of printing is binding processing. The most commonly used single sheet is cutting, pressing, folding and so on. Decisions should be stopped according to the number of pages in the picture album, the type of paper, the delicacy and the way and purpose of use.