Jinan packaging printing ink skinning measures we all know that when the ink in the process of the ink in the ink bucket dry surface, forming a horizontal film, or place a mixing device, or just ink pour, otherwise, will be attached to the film, the result will be uneven layout, resulting in printing pollution.

　　究其原因，油墨行业趋向于:

　　The reason is that the ink industry tends to:

　　(1)油墨干燥过快;

　　(1) Ink drying too fast;

　　(2)油墨流动性差;

　　(2) Poor ink fluidity;

　　(3)油墨沉淀已干。但这种现象是由于油墨系统的蒸发,蒸发,或氧化干燥梯度很大,而印刷:印刷油墨油墨或墨斗结构不好,没有剩余的部分,从干衣机里泄漏空气干燥的油墨表面或热吹风机吹墨斗中的油墨。

　　(3) The ink is dry. But this phenomenon is due to the evaporation, evaporation, or oxidation drying gradient of the ink system is very large, while printing: the structure of printing ink or ink bucket is not good, there is no remaining part, the air dried ink surface leaked from the dryer or the ink in the ink bucket of the heat blower.

　　虽然有不同的看法，但围绕这一现象的出现，印刷操作人员一般采用以下方法:

　　Although there are different opinions, the printing operators generally adopt the following methods to solve this problem:

　　(1)不能使用过快干燥的油墨;

　　(1) Do not use too fast drying ink;

　　(2)加入中、慢速干燥溶剂;

　　(2) Add medium and slow drying solvent;

　　(3)更换变质的油墨(即从流动性差到流动性好);(4)在油墨中不停搅拌;(5)墨斗上设有封盖;(3) Replace the deteriorated ink (i.e. from poor fluidity to good fluidity); (4) keep stirring in the ink; (5) the ink bucket is provided with a cover;(6)调节吹热角度。一般有印刷经验的常识,当墨水干燥速度过快,的浓度或太轻,或流,触变性,墨水或油墨静电,将转移印花机器速度快,不仅防止墨水早期干节点板上,并克服包装和印刷油墨膜壳的形成,失败的图形标志。

　　(6) Adjust the blowing angle. General knowledge of printing experience, when the ink drying speed is too fast, the concentration is too light, or flow, thixotropy, ink or ink static electricity, the transfer printing machine will be fast, not only to prevent the ink from drying on the early node plate, but also to overcome the formation of packaging and printing ink film shell, and eliminate the failure of graphic signs.

　　以上是济南包装印刷公司为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：http://www.jindingyinshua.comThese are the relevant contents introduced by Jinan packaging printing company. If you want to know more, please visit the website: http://www.jingyinshua.com