The equipment management department is responsible for the lubrication of Jinan label printing equipment, with the cooperation of the production department and the supply department. The equipment management department first establishes the lubricating oil purchase system, lubricating material warehouse management and safety fire protection system, lubricating material distribution system and lubricating oil use system. Second, organize technical personnel to prepare equipment lubrication chart and annual equipment cleaning and oil change plan, guide and supervise relevant personnel to carry out lubrication work and solve difficult problems in lubrication work; third, summarize and promote lubrication work experience in time.

　　润滑油的采购、验收、储存和分配

　　Purchase, acceptance, storage and distribution of lubricating oil设备管理部采购人员应熟悉印刷设备，了解润滑油的性能特点及相关的生产、销售企业，确保购买合适的润滑油;润滑油按严格的油品验收制度入库;仓库人员应在相关技术人员的指导下科学合理地储存油品;相关人员应根据所编制的设备润滑计划、领用卡、领用润滑油，以及润滑油使用说明书，对设备进行润滑工作。

　　The purchasing personnel of the equipment management department shall be familiar with the printing equipment, understand the performance characteristics of the lubricating oil and the relevant production and sales enterprises, and ensure to purchase the appropriate lubricating oil; the lubricating oil shall be warehoused according to the strict oil product acceptance system; the warehouse personnel shall store the oil scientifically and reasonably under the guidance of the relevant technical personnel; Relevant personnel shall lubricate the equipment according to the prepared equipment lubrication plan, receiving card, receiving lubricating oil and lubricating oil operation instruction.

　　济南标签印刷设备润滑工作的内容

　　Contents of lubrication work of Jinan label printing equipment日常润滑维护

　　Daily lubrication maintenance

　　开机前，生产部需对印刷设备的润滑系统、传动机构、控制系统、滑动面等进行检查，确保设备各部分在开机前均配置了良好的润滑;工作前要仔细清洁设备，铁质、杂质等，擦拭干净，在润滑部润滑。

　　Before start-up, the production department shall check the lubrication system, transmission mechanism, control system, sliding surface, etc. of the printing equipment to ensure that all parts of the equipment are equipped with good lubrication before start-up; before work, the equipment shall be cleaned carefully, iron and impurities shall be removed, wiped clean, and lubricated in the lubrication department.

　　定期维护

　　Regular maintenance

　　设备管理部组织相关人员对印刷设备进行定期检查，疏通润滑油路，增加油料量，清理油过滤器、油毡、油品标准，对损坏的油泵、油管、供油系统等进行更换和维修。如果印刷设备长期处于关闭状态，应进行防锈润滑处理。

　　The equipment management department shall organize relevant personnel to conduct regular inspection on the printing equipment, dredge the lubricating oil circuit, increase the oil quantity, clean the oil filter, felt and oil standard, and replace and repair the damaged oil pump, oil pipe and oil supply system. If the printing equipment is shut down for a long time, it should be treated with antirust lubrication.

　　更换润滑油

　　Change lubricating oil

　　经过一段时间后，印刷设备的润滑剂在使用过程中会由于氧化等因素的影响而逐渐变质。一些印刷企业为了降低成本,往往试图延长润滑油的使用,不知道润滑剂的性能和技术指标的恶化已经无法满足润滑需求,然后继续使用在印刷设备会产生消极的影响。有些印刷企业将废油沉淀后使用，虽然沉淀可以除去大部分废油污泥、水和机械杂质，但其他油品技术指标没有改善，对设备的磨损将是长期的。因此，要想循环出油，必须更换所有的新油。

　　After a period of time, the lubricant of printing equipment will gradually deteriorate due to oxidation and other factors in the use process. In order to reduce the cost, some printing enterprises often try to prolong the use of lubricating oil. They do not know that the deterioration of lubricant performance and technical indicators has been unable to meet the lubrication demand, and then continue to use it in printing equipment will have a negative impact. Some printing enterprises use waste oil after sedimentation. Although sedimentation can remove most of waste oil sludge, water and mechanical impurities, other oil technical indicators have not been improved, and the wear of equipment will be long-term. Therefore, in order to recycle the oil, all new oil must be replaced.

　　更换润滑油时应注意:保养时尽量换油;更换机油不容易报废，如机油仍良好，可稍加处理(如沉淀过滤、除水、杂质)后再使用二次设备;废油应收集和再处理，以防止环境污染。

　　When changing lubricating oil, attention shall be paid to: change oil as much as possible during maintenance; change oil is not easy to be scrapped, if the oil is still good, it can be treated slightly (such as sedimentation filtration, water removal, impurities) before using the secondary equipment; waste oil shall be collected and reprocessed to prevent environmental pollution.

　　以上是济南标签印刷厂家为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：http://www.jindingyinshua.comThe above is the related content introduced by Jinan label printing factory. If you want to know more, please visit the website: http://www.jingyinshua.com