手提袋印刷尺寸：
Printed Size of Handbag:
手提袋印刷的尺寸通常根据包装品的尺寸而定。通用的手提袋印刷标准尺寸分三开，四开或对开三种。每种又分为正度或大度两种。其手提袋印刷净尺寸由长×宽×厚组成，比如:我们在市面上常见的手提袋尺寸:400mm*300mm*80mm,这种手提袋是非常合理的尺寸,是一张正底的纸分成两个来印刷,就是我们常说的正对开手提袋.有时候我们经常会发现同样是正对开的尺寸做成的手提袋可看上去就不一样的大小,这就是因为虽然印刷的时候可以同样用正对开的纸张,可是在糊制的时候可以根据自己的需要变成不同的宽与高或者厚度.
The size of handbag printing usually depends on the size of the package. The standard sizes of general handbag printing are divided into three parts, four parts or opposite parts. Each is divided into positive or large. The net print size of the handbag is composed of length, width and thickness. For example, the size of the handbag we commonly see on the market is 400mm * 300mm * 80mm. This kind of handbag is a very reasonable size. It is a paper with a positive bottom that is printed in two parts, which is what we often call a handbag with a positive opening. Sometimes we often find that the same size is also a positive opening. The handbags can look different in size. This is because although they can be printed on opposite sheets of paper, they can be made into different sizes or thicknesses according to their own needs when pasting.
手提袋印刷纸张：
Handbag Printed Paper:
手提袋印刷的纸张可选用200g,250克的铜版纸。如需与较重的包装品配套，可选用210克,230克,250克,的白卡纸,或300g铜版纸印刷。200克或者250克的铜版纸摸上去有些软,但它的韧性比较好,210克或230克,250克的白卡纸制作出来的手提袋比较硬,看上去很挺的感觉,由于是单面的铜版纸,所以袋子里面看上去是很粗糙的,并且它的韧性不好,在折角的地方容易开裂.
Handbag printed paper can be 200 g, 250 g copperplate paper. For heavy packages, 210 grams, 230 grams, 250 grams of white cardboard or 300g copperplate paper can be used for printing. 200 grams or 250 grams of copperplate paper feel a little soft, but its toughness is better, 210 grams or 230 grams, 250 grams of white cardboard made of handbags are hard, look very good feeling, because it is one-sided copperplate paper, so the inside of the bag looks very rough, and its toughness is not good, easy to crack in the corner.
如选用铜版纸或卡纸印刷手提袋，一般需覆膜来增加其强度。此外，白牛皮纸由于其韧性强，使用，近越来越多地应用在手提袋印刷制作上，通常可选用120g或140g的白色或黄色牛皮纸，手提袋印刷以后需过油以保护油墨不在做袋时擦脏 。
If you choose copper plate or cardboard printed handbags, you usually need to coat them to increase their strength. In addition, because of its toughness and environmental protection, white kraft paper is more and more widely used in the printing of handbags. White or yellow kraft paper of 120g or 140 g is usually chosen. Oil is needed after printing to protect ink from being dirty when making bags.
手提袋印刷加工工艺：
Handbag printing process:
手提袋印刷后,可以根据不同的需要,选择覆膜,也有烫金或者UV等后期制作,在后期制作时,需要覆膜的要先覆膜,可有亮膜与哑膜选择,然后根据印刷的尺寸去做模切版,在模切机上一张一张的进行压切,之后再根据模切出的痕迹进行手工操作,这也是在整个糊制手提袋中慢的一个环节,糊好后进行穿绳.手提袋印刷的绳子可选用尼龙绳，棉绳或纸绳。如手提袋印刷尺寸较大时，需在绳孔处加固铆钉以抗拉力
After handbag printing, it can be chosen to cover film according to different needs, as well as post-production such as hot stamping or UV. In post-production, it is necessary to cover film first, and then choose bright film and dumb film. Then, according to the size of printing, die-cutting is done one by one on the die-cutting machine, and then hand-cutting is carried out according to the marks of die-cutting. The manual operation is also a slow link in the whole pasted handbag. After pasting, the handbag can be threaded. The printed rope of the handbag can be nylon rope, cotton rope or paper rope. If the printing size of handbag is large, rivets should be strengthened at the rope hole to resist tension.
We specially provide Jinan handbag printing service for you. For more information, please visit our website: http://www.jindingyinshua.com. We will have more content waiting for you to see.
